You visited a few times and I would appreciate your thoughts on this post, why not comment?

Required Materials:

Thinset Mortar
Trowel
Scissors
Grout
Grout Float
Sponge(s)
Sealer
Paint Brush

Installation Steps:

1. With the trowel, apply the thinset evenly on the desired area. 2. Lay the pebble tiles down, interlocking each tile on all sides.

3. To fit a tile in a space too small for a whole tile, cut the mesh which hold the pebbles together. You can also remove individual pebbles to fill empty spaces. 4. Once complete, allow at least 24 hours for the thinset to dry before grouting. 5. Apply a coat of sealer to prevent the stone absorbing color from the grout. 6. Apply the grout with the grout float so that the grout is packed in all the space between the pebbles.

7. Allow the grout to set for up to 20 minutes. Then, with a wet sponge, clean the excess grout off the surface of the pebbles. 8. Continue to clean the grout residue with a clean sponge until desired pebble exposure is reached. 9. Allow 24 hours for the grout to dry completely then apply a coat of sealer over the grout and pebbles.